Green Instrument thread Fittings have been developed based on ASME B31.3 for instrumentation and process control in sizes 1/8″ to 2″. Green Thread and weld fittings have a wrench flat allowing standard Hex wrench assembly. This is one of the Green Pipe fitting benefits.
Male NPT both ends
| Material | Dimensions | Material Standards and Temperature Ratings | Features |
|---|---|---|---|
| Stainless Steel 316/316L Dual Grade | Thread Type: NPT P-Pipe Size: 1/2 L: 46.7 mm E: 11.9 mm H-Hex: 22.2 mm |
Bar Stock: ASTM A276, ASTM A479 Forgings: ASTM A182, JIS G3214 Temperature Ratings: 537 ºC (998 ºF) Pipe End Pressure Rating: Male: 517 bar (7500 psig) Female: 324 bar (4700 psig) |
-Attractive finishes to suit precision equipment -Space-saving therefore less-weight design -Each fitting is cleaned to remove particles, oil and grease -Fine NPT pipe thread construction equals or exceeds the requirement of ASME B1.20.1 to ensure maximum thread engagement -Service at greater pressure levels than the traditional class 3000 pipe fitting to ASME B16.11 -Male pipe threads are capped to be protected from damages -Fitting material available in SS316, Brass and Carbon Steel |
1. Pressure ratings listed are for temperature up to 37.8° C (100°F). Based on Pressure Piping Code ASME B31.3, pressure rating is calculated with an allowable stress value of 20,000 psi for SS316, 10,000 psi for Brass, and 20,000 psi for Carbon Steel. To determine the working pressure in accordance with Power Piping Code ASME B31.1, multiply psig by 0.94. Brass pressure ratings remain the same. Reducing Hex Bushing (GHB) pressure rating is not covered in this table. See the pressure rating in the dimensional table.
Arpco Supply is here to ensure that you receive the best products and service available. We are here to answer any questions you may have. Contact us today!
Mon – Thu:
8AM – 5PM
Friday:
8AM – 3PM
Saturday: Closed
Sunday: Closed
2023 Arpco Supply | All Rights Reserved | Privacy Policy | Powered By Starfish Ad Age
Reviews
There are no reviews yet.